BL506 Vacuum Dead weight Tester
- Availability: In Stock
BL506 Vacuum Dead weight Tester
|
With 0.01%rdg accuracy, the BL506 vacuum deadweight tester have dual vacuum and pressure modes. Pressure and vacuum application can be operated by hand pump or external gas supply. To guarantee an excellent metrology-logic characteristic, all pistons and cylinders are made of tungsten carbide. Because of the extreme hardness of this material, the pressure distortion (expansion) coefficient is negligible. The low friction coefficient provides minutes of turning with just a little swing of the masses. |
Overview
|
Application
- Primary pressure standard in lab
- Reference vacuum measure in workshop
Specification
- Accuracy: 0.01%rdg, 0.02%rdg, 0.005%rdg (customized)
- Piston and cylinder material: Tungsten carbide
- Mass material: Forged 316 stainless steel
- Tester base and pump material: Aluminium
- Seal material: Buna-N, FTM PTFE, Cu Alloy
- Medium: Dry and clean air
- Pressure units available: MPa, bar, psi (optional)
- Pressure connector: Metric, (NPT and BSP is optional)
- Gravity: Standard 9.80665 m/s², or customize local gravity.
- Tester dimension: 500 mm (H) x 650 mm (L) x 500 mm (D)
- Pump dimension: 225 mm (H) x 455 mm (L) x 380 mm (D)
- Tester weight: Appro.25kg / Pump weight: Appro.15kg
- Warranty: two years
Pressure Selectable Sheet
P/N |
Pressure Range |
Kn Value |
Effective Area |
Mass Set |
KYQZ100 |
(-0.1~0.1) MPa |
10kPa/kg |
10 cm2 |
10kg+10 kg |
KYQZ160 |
(-0.1~0.16) MPa |
20kPa/kg |
5 cm2 |
5 kg+8kg |
KYQZ250 |
(-0.1~0.25) MPa |
20kPa/kg |
5 cm2 |
5 kg+12.5kg |
KYQZ400 |
(-0.1~0.4) MPa |
20kPa/kg |
5 cm2 |
5 kg + 20kg |
KYQZ600 |
(-0.1~0.6) MPa |
20kPa/kg |
5 cm2 |
5 kg + 30kg |
Ordering info and accessories
Scope of delivery
|
Optional Accessories
|
Image gallery
|
|
|