Bel Enggineering

M5 Series

HPBG Series

HPB Series

M5 Series

M and MG Series

M5 Series

MG and MGW Series

M and MG Series

LW and LWG Series

L and LG Series

S PORTABLE Series

ES PORTABLE Series

 FOUNDRY DENSITY BALANCE

PIPETTE CHECKING 

M5-RB Series

RGB Series

RB Series

M5-Thermo series

i-Thermo G series

i-Thermo series

The entry level of balances keeping all the quality of higher level balances. The essential to have always precise and reliable results with the minimum investment. The refined design, the small dimensions, the backlit LCD display, the possibility of operating also with AA type batteries and the many on-board software functions already included make this balance a product with the best quality over price.

• High resolution load cell weighing system
• Small footprint, portable
• External calibration
• LCD with backlight
• Operates also with AA batteries (not included)
• Plastic protection cover

• Rechargeable battery, type AA (E803)
  (balances ES require five)
• Factory Calibration certificate (BL0333)

i-Thermo are rugged moisture analyzers for moisture determination of raw materials and finished samples in the food, cosmetics, ceramics, agriculture and construction industry.With Halogen heating that distributes the heat uniformly over the sample, the i-Thermo moisture analyzers provide quick and accurate results trough easy operating steps.
 
Backlit LCD display, RS232 interface, easy to clean, drying resolution 0,001%, 0,01% and 0,1% i-Thermo is the ideal instrument for every budget. Possibility of calibrating the internal thermometer (w/ optional KIT). The heater can operate from 35 °C to 160 °C.

• Electromagnetic force restoration weighing system (A64M and 163M models)
• High resolution load cell weighing system (163L and 62L models)
• Halogen-infrared lamp
• External calibration
• LCD with adjustable contrast backlight
• Time (1-99 min) and Autostop operating modes
• 5 drying programs can be stored
• Temperature range: 35-160°C/1°C
• Moisture, dry residue in percentage and ATRO indications
• Drying resolution 0,001% – 0,01% – 0,1%
• Plastic protection cover

• Ioniser Ion-A15 (BL0371)
• Thermometer calibration KIT (STCi-02)
• Serial Printer TLP-50, with date/time (C054)
• Serial Printer DPP-250 (AC007)
• Alphanumeric external keyboard (AC005)
• Serial to USB converter (E1002)
• Serial cable for output to printer/PC (E743)
• Aluminium TEST pans (Ø 100mm x 0,5mm) (A753)
• Fiber glass TEST pans (Ø 90mm) (AC026)
• Factory Calibration certificate (BL0333)

The i-Thermo G are rugged instruments for moisture determination of raw materials and finished samples in the food, cosmetics, ceramics, agriculture and construction industry.
The Dot Matrix graphical display with backlite makes much easier and friendly using the instrument and gives easy and intuitive guidance through the operating process thanks also to his advanced software. On the display are shown all the parameters regarding the drying process and all the relative results, all viewable at once.
This instrument brings advanced features such as one key pressing for starting automatically the last drying cycle memorized or the default one, possibility to print the drying session by interval time set by the user, automatic session starting just by closing the heater etc…
Drying readability is 0,001%. Possibility of calibrating the internal thermometer (with optional KIT).

• Electromagnetic force restoration weighing system (A64MG and 163MG models)
• High resolution load cell weighing system (163LG and 62LG models)
• Halogen-infrared lamp
• Large Graphic display allows efficient and easy operations
• External calibration
• Date and time indication
• Multi language: EN-DE-FR-IT-ES-PT
• GLP/ISO record
• Two heating modes: standard and rapid
• Pre-heating on/off
• Time (1-99 min) and Autostop operating modes
• Temperature range: 35-160°C/1°C
• RS232 serial interface
• Moisture, dry residue in percentage and ATRO indications
• View and print the moisture analyzer and heater’s last stored calibration data
• Measuring unit g or mg
• Automatic starting of sessions by closing the heater
• Plastic protection cover

• Ioniser Ion-A15 (BL0371)
• Thermometer calibration KIT (STCi-02)
• Serial Printer TLP-50, with date/time (C054)
• Serial Printer DPP-250 (AC007)
• Alphanumeric external keyboard (AC005)
• Serial to USB converter (E1002)
• Serial cable for output to printer/PC (E743)
• Aluminium TEST pans (Ø 100mm x 0,5mm) (A753)
• Fiber glass TEST pans (Ø 90mm) (AC026)
• Factory Calibration certificate (BL0333)

Balances Series L are a synthesis of design, performance and convenience. Thanks to a sophisticated software and to a high-performance load cell, these balances deliver top performance at competitive prices. Double case structure, ergonomic keypad, external or internal calibration. Many embedded advanced features make them perfect for your work.

• High resolution load cell weighing system
• External or automatic internal calibration
• LCD with backlight with adjustable contrast
• Round glass windshield
• Plastic protection cover
• Under hook weighing* (Not available for verified models)
• Optional functions
• Paper Grammage Function (T219)

• Ioniser Ion-A15 (BL0371)
• Comunication KIT with PC for balances (BL0476)
• BEL Tablet System for balances. USB version (BL0329) or BLUETOOTH version (BL0330)
• Bluetooth printer DPP-250-BT for BEL Tablet system (AC013)
• Serial Printer TLP-50, with date/time (C054)
• Serial Printer DPP-250 (AC007)
• Serial Printer STAT, with Statistics functions (AC022)
• Portable rechargeable battery pack (AC015)
• Density KIT for solids and liquids (AC002)
• Density KIT for solids (AC001)
• Alphanumeric external keyboard (AC005)
• Serial to USB converter (E1002)
• Serial cable for serial output to printer or PC (E743)
• Factory Calibration certificate (BL0333)

A Top Quality series of Precision Balances that combine elegance with highly reliable measuring performance. Double case structure, ergonomic keypad. LG balances have an extensive recipe database and many embedded advanced features make them perfect for use in laboratory, research departments, formulation and quality control applications.

• High resolution load cell weighing system
• External or automatic internal calibration
• Recipe database: 99 recipes can be stored, each with up to 20 ingredients
• Large Graphic display allows efficient and easy operations
• Multilanguage: EN-DE-FR-IT-ES-PT
• GLP/ISO record keeping of weight values with date, time and serial number
• Round glass windshield
• Plastic protection cover
• Under hook weighing* (Only for external calibration model)

• Ioniser Ion-A15 (BL0371)
• Serial Printer TLP-50, with date/time (C054)
• Serial Printer DPP-250 (AC007)
• Density KIT for solids and liquids (AC002)
• Density KIT for solids (AC001)
• Portable rechargeable battery pack (AC015)
• Alphanumeric external keyboard (AC005)
• Serial to USB converter (E1002)
• Serial cable for serial output to printer or PC (E743)
• Factory Calibration certificate (BL0333)

A Top Quality classic series of Precision Balances that combine elegance with highly reliable measuring performance.
Double case structure, ergonomic keypad, external or internal calibration. Many embedded advanced features make them perfect for use in laboratory, research departments, formulation and quality control applications.

• Electromagnetic force restoration weighing system
• External or automatic internal calibration
• LCD with backlight with adjustable contrast
• Round glass windshield
• Plastic protection cover
• Under hook weighing* (Not available for verified models)

• Ioniser Ion-A15 (BL0371)
• Comunication KIT with PC for balances (BL0476)
• BEL Tablet System for balances. USB version (BL0329) or BLUETOOTH version (BL0330)
• Bluetooth printer DPP-250-BT for Tablet system (AC013)
• Serial Printer TLP-50, with date/time (C054)
• Serial Printer DPP-250 (AC007)
• Serial Printer STAT, with Statistics functions (AC022)
• Density KIT for solids and liquids (AC002)
• Density KIT for solids (AC001)
• Alphanumeric external keyboard (AC005)
• Serial to USB converter (E1002)
• Serial cable for serial output to printer or PC (E743)
• Factory Calibration certificate (BL0333)
• Conformity Declaration (Verification)

In foundries, especially for aluminium casting plants, the quality of molten metals is very important to assure the quality of the final cast product since impurities may negatively affect the quality of the cast.
Defects created during the melting stage could create problems to the final micro-structure of the cast so is a mandatory step for the quality control department to check the quality of the melt.

By measuring the density Index (DI) of the metal, it is possible to define, control and optimize the process of cleaning the cast, improving the quality. In this way also rejection rate is drastically reduced.
The density index represents the percentage difference in density between the two samples; the lower the density index the cleaner the aluminium melt and the fewer pores formed.

With BEL Engineering advanced balance M5-iDens, doing the density index measurement of a material is easy and fast. With a 5 inch touch screen interface, latest generation of microprocessors and intuitive user interface the user can have immediately accurate, clear and fast results.
Without the necessity to connect the balance to computer for using a software, all the data and results can be seen directly from the large touch screen of the balance, with the possibility to print also all the data with an optional printer.

• Electromagnetic force restoration weighing system
• 5 inch color touch screen display
• Easy and intuitive user interface
• Automatic internal calibration
• Efficient filtering to deliver quick and accurate results
• GLP compliance
• Multi-language
• Multi-user access protected by password
• Embedded Density Index calculation software, no need to connect the balance to a computer

The new M5-RB high capacity balances bring robustness, reliability and a high level of performance. The M5-RB models are equipped with a large 5’’ color touchscreen display that gives an user-friendly access to all the balance’s advanced applications and internal databases.
The user has easy and intuitive access to all the functions thanks to the icon-driven menus. This means more efficiency, productivity and interactivity.
The many embedded functions make these balances an ideal instrument of work for many applications inside and outside laboratory and factory.

• Electromagnetic force restoration weighing system
• High performance load cell
• Automatic internal calibration and external calibration
• 5’’ Touch-screen Display 800×480
• RS232 serial interface
• Selectable Measuring units
• Internal Database
• GLP
• Multi Languages (EN-DE-FR-IT-SP-PT)
• Multi-user with password protection
• USB port for import/export database data
• Advanced piece-counting function with Statistics report
• Textile function to measure fibers with Statistics report
• Advanced Density function, with density index (DI) calculation
• Formulation (Recipe)
• Check-weighing
• Percentage weighing
• Weights adding
• Animal weighing
• Max load determination (Peak hold)

• Ioniser Ion-A15 (BL0371)
• Serial Printer TLP-50, with date/time (C054)
• Serial Printer DPP-250 (AC007)
• Serial Printer STAT, with Statistics functions (AC022)
• Portable rechargeable battery pack (AC015)
• Serial to USB converter (E1002)
• Serial cable for serial output to printer or PC (E743)
• Factory Calibration certificate (BL0333)

M5-iThermo balances are moisture analyzers with large 5’’ color touchscreen display that gives a user-friendly access to all the moisture analyzer’s advanced applications and internal databases. The user has easy and intuitive access with fast programming of drying cycles, thanks to icon-driven menus.

This means more efficiency, productivity and interactivity. A double case structure protects the heart of the balance: an aluminum inner case and a composite plastic external case.

The many on-board functions already included, the possibility of calibrating the internal thermometer using the optional KIT (STCi-02), up to 6 operating languages, the large 5’’ inch display and the RS232 serial output close the circle of a complete product, reliable and truly convenient. The models in the family allow to reach up to 0,001% drying resolution.

• Electromagnetic force restoration weighing system (A64M and 163M)
• High resolution load cell weighing system (163L and 62L)
• Halogen-infrared lamp
• External calibration
• Large 5’’ color touchscreen 800×480 display
• RS232 serial interface
• Drying resolution 0,001% (-A64M), 0,01% (-163M and -163L), 0,1% (-62L)
• Drying modes:Time mode (1-99 min.),Autostop % or absolute autostop in grams, Manual
• Live Graph of humidity content changing
• Temperature range:35-160°C, step of 1°C
• Temperature Profiles: Standard, fast, mild, steps
• Results in: Humidity %, Dry residue %, ATRO %, Weight
• Test results complete of full drying cycle Graph
• Up to 10 hot keys for fast recall of drying cycles from internal database
• Default database stored already with more than 30 products
• Saving results with test reports and drying graphic up to 3000 records, for each user
• Customizable settings for up to 10 users with the possibility of password protection
• Serial output for connection to printer, USB port for export or import database, test results, etc.

• Thermometer calibration KIT (STCi-02)
• Serial Printer TLP-50, with date/time (C054)
• TEST pans (Ø 100mm x 0,5mm) (A753)
• Fiber glass TEST pans (Ø 90mm) (AC026)
• Ioniser Ion-A15 (BL0371)
• Factory Calibration certificate (BL0333)
• Usb pendrive 8Gbyte (AC020)
• Touchscreen Stylus pen (AC021)

Double case structure, ergonomic keypad. MG balances have an extensive recipe database and many embedded advanced features make them perfect for use in laboratory, research departments, formulation and quality control applications.

• Electromagnetic force restoration weighing system
• External or automatic internal calibration
• Recipe database: 99 recipes can be stored, each with up to 20 ingredients
• Large Graphic display allows efficient and easy operations
• Multilanguage: EN-DE-FR-IT-ES-PT
• GLP/ISO record keeping of weight values with date, time and serial number
• Round glass windshield
• Plastic protection cover
• Under hook weighing* (Not available for verified models)

• Ioniser Ion-A15 (BL0371)
• Serial Printer TLP-50, with date/time (C054)
• Serial Printer DPP-250 (AC007)
• Density KIT for solids and liquids (AC002)
• Density KIT for solids (AC001)
• Alphanumeric external keyboard (AC005)
• Serial to USB converter (E1002)
• Serial cable for serial output to printer or PC (E743)
• Factory Calibration certificate (BL0333)
• Conformity Declaration (Verification)

Pipettes are widely used instruments in laboratories and their proper maintenance is essential to ensure correct and reliable results. Each laboratory should establish a regular verification program, in order to carry out their preventive maintenance or (re) calibration, if necessary.
  
This series of balances is designed for the verification of piston pipettes using the gravimetric method. The embedded “Pipette Check” software allows you to test the correct operation of a pipette by selecting a verification method. At the end, a detailed report is generated with the overall test result (compliant or not-compliant pipette) and the relative partial values.
  
The -PT models include the evaporation trap that consists of a special weighing container designed to considerably reduce the evaporation of the liquid which occurs naturally during the pipette test procedure. If not well taken into consideration, this effect will negatively affects the tests by increasing the measurement error leading to an incorrect final result, especially in the case of small volumes. The evaporation trap creates a saturated area of water vapor above the test tube containing the liquid coming from the pipette, thus the evaporation of the latter is minimal during the procedure and reliable results can be obtained.

• 5 inch color touch-screen display (800×480)
• Automatic internal calibration
• Draftshield with 3 sliding doors
• RS232 serial output
• Selectable measuring units
• On-board Software functions: Pipette Check, piece counting, Check weighing, Percentage weighing, Statistics, Animal weighing, Peak hold, Density determination, Recipe, Textile
• GLP protocol
• Internal Database
• Multi language (ITA-ENG-ESP-POR-GER
• Multi-user with password protection
• USB port to import/export data of database

Verifiable pipette types:

• Fixed Volume / Variable Volume
• Air displacement / Positive displacement (reusable) / Positive displacement (disposable)

Verification methods:

• ISO8665
• 4x (100% 10%): 4 samples at 100% and 10% of the nominal volume
• 4x (100%): 4 samples at 100% of the nominal volume
• Custom: number of samples and percentage of the volume of your choice

Which balance’s model to choose:

The balance must be chosen based on the volume of the pipette to be checked. Smaller volumes will need higher resolution balances. Within the current family of balances for pipette checking it is possible to check the following volumes, in accordance with the ISO 8665 standard:

However, the balances of this series can always be used for normal laboratory weighing operations; in the case of -PT models, the evaporation trap is easily removable.

A fusion of design and quality, precision balances S series enclose all the experience of higher class models in a small footprint portable balance.
Thanks to the BEL Engineering sophisticated software and to a high-performance load cell, these balances can reach maximum capacity of 520 grams with 0.001 grams resolution.
Solid structure, refined construction materials, ergonomic keypad and the many embedded software functions make this balance a complete product at a very competitive price, perfect for every budget, keeping the high class and quality typical of BEL.

• High resolution load cell weighing system
• Small footprint, portable
• External calibration
• LCD with backlight with adjustable contrast
• Round glass windshield
• Plastic protection cover
• Operating with internal accumulator (not included)
• Optional functions
• Paper Grammage Function (T219)

• Ioniser Ion-A15 (BL0371)
• Comunication KIT with PC for balances (BL0476)
• BEL Tablet System for balances. USB version (BL0329) or BLUETOOTH version (BL0330)
• Bluetooth printer DPP-250-BT for Tablet system (AC013)
• Serial Printer TLP-50, with date/time (C054)
• Serial Printer DPP-250 (AC007)
• Serial Printer STAT, with Statistics functions (AC022)
• Density KIT for solids and liquids (AC002)
• Density KIT for solids (AC001)
• Alphanumeric external keyboard (AC005)
• Serial to USB converter (E1002)
• Serial cable for serial output to printer or PC (E743)
• Factory Calibration certificate (BL0333)

A Top-Quality series of Analytical Balances that combine elegance with highly reliable measuring performance. Double case structure, ergonomic keypad. MG balances have an extensive recipe database and many embedded advanced features make them perfect for use in laboratory, research departments, formulation and quality control applications.

• Electromagnetic force restoration weighing system
• External or automatic internal calibration
• Recipe database: 99 recipes can be stored, each with up to 20 ingredients
• Large Graphic display allows efficient and easy operations
• Multilanguage: EN-DE-FR-IT-ES-PT
• GLP/ISO record keeping of weight values with date, time and serial number
• Large glass draught shield with 3 sliding doors for easy access to the items being weighed
• Plastic protection cover

• Ioniser Ion-A15 (BL0371)
• Serial Printer TLP-50, with date/time (C054)
• Serial Printer DPP-250 (AC007)
• Serial Printer STAT, with Statistics functions (AC022)
• Density KIT for solids and liquids (AC002)
• Alphanumeric external keyboard (AC005)
• Serial to USB converter (E1002)
• Serial cable for serial output to printer or PC (E743)
• Factory Calibration certificate (BL0333)
• Conformity Declaration (Verification)

M5 analytical balances are the most innovative and advanced series made by BEL Engineering. Equipped with large 5’’ colour touch screen display, it gives a user-friendly access to all the balance’s advanced applications and internal databases.

The user has easy and intuitive access to all the functions thanks to the icon-driven menus. This means more efficiency, productivity and interactivity. A double case structure protects the heart of the balance: an aluminium inner case and a composite plastic external case.

The many on-board functions already included, up to 6 operating languages, the large 5’’ inch display and the RS232 serial output close the circle of a complete product, reliable and truly convenient.

• Electromagnetic force restoration weighing system
• Highly integrated weighing cell
• Automatic internal calibration
• 5’’ Touch-screen Display 800×480
• RS232 serial interface
• Selectable Measuring units
• Internal Database
• GLP
• Multi Languages (EN-DE-FR-IT-SP-PT)
• Multi-user with password protection
• USB port for import/export database data
• Advanced piece counting function with Statistics report
• Textile function to measure fibres with Statistics report
• Advanced Density function, with density index (DI) calculation
• Formulation (Recipe)
• Checkweighing
• Percentual weighing
• Weights adding
• Animal weighing
• Max load determination (Peak hold)
• Large glass draught shield with 3 sliding doors for easy access to the items being weighed

• Portable ioniser Ion-A15 (BL0371)
• Serial Printer TLP-50, with date/time (C054)
• Serial Printer DPP-250 (AC007)
• Serial Printer STAT, with Statistics functions (AC022)
• Density KIT for solids and liquids (AC002)
• Serial to USB converter (E1002)
• Serial cable for serial output to printer or PC (E743)
• USB pen drive 8 Gigabyte
• Stylus pen for touchscreen
• Factory Calibration certificate (BL0333)

M5 precision balances are the most innovative and advanced series made by BEL Engineering. Equipped with large 5’’ colour touch screen display, it gives a user-friendly access to all the balance’s advanced applications and internal databases.

The user has easy and intuitive access to all the functions thanks to the icon-driven menus. This means more efficiency, productivity and interactivity.

A double case structure protects the heart of the balance: an aluminium inner case and a composite plastic external case.

With resolution from 0,001g to 0,1g this series offers a wide choice of models for many applications with the simplicity of a touch screen interface.

The many on-board functions already included, up to 6 operating languages, the large 5’’ inch display and the RS232 serial output close the circle of a complete product, reliable and truly convenient.

• High resolution load cell weighing system
• Automatic internal calibration
• 5’’ Touch-screen Display 800×480
• RS232 serial interface
• Selectable Measuring units
• Internal Database
• GLP
• Multi Languages (EN-DE-FR-IT-SP-PT)
• Multi-user with password protection
• USB port for import/export database data
• Advanced piece-counting function with Statistics report
• Textile function to measure fibres with Statistics report
• Advanced Density function, with density index (DI) calculation
• Formulation (Recipe)
• Checkweighing
• Percentual weighing
• Weights adding
• Animal weighing
• Max load determination (Peak hold)
• Large glass draught shield with 3 sliding doors for easy access to the items being weighed

• Portable ioniser Ion-A15 (BL0371)
• Serial Printer TLP-50, with date/time (C054)
• Serial Printer DPP-250 (AC007)
• Serial Printer STAT , with Stastistics functions (AC022)
• Density KIT for solids and liquids (AC002)
• Serial to USB converter (E1002)
• Serial cable for serial output to printer or PC (E743)
• USB pendrive 8 Gigabyte
• Stylus pen for touchscreen
• Factory Calibration certificate (BL0333)

Bel Engineering introduces the new series of semi Micro HPB balances with a resolution of 0.01 mg. Equipped with the new highly integrated electromagnetic cell, with automatic internal calibration on all models, they are characterized by a high level of precision and repeatability. As in the tradition of BEL products, new semi Micro HPB balances deliver an excellent performance / price ratio, thanks to the continuous research and study of Bel Engineering in the high resolution and precision weighing field

• Electromagnetic force restoration weighing system
• Highly integrated weighing cell
• Automatic internal calibration
• Efficient filtering to deliver quick and accurate results
• LCD with backlight with adjustable contrast
• Large glass draught shield with 3 sliding doors for easy access to the items being weighed
• Plastic protection cover for keypad

• Portable Ioniser Ion-A15 (BL0371)
• BEL Tablet System for balances. USB version (BL0329) or BLUETOOTH version (BL0330)
• Bluetooth printer DPP-250-BT for Tablet system (AC013)
• Serial Printer TLP-50, with date/time (C054)
• Serial Printer DPP-250 (AC007)
• Serial Printer STAT, with Statistics functions (AC022)
• Density KIT for solids and liquids (AC002)
• Alphanumeric external keyboard (AC005)
• Serial to USB converter (E1002)
• Serial cable for serial output to printer or PC (E743)
• Factory Calibration certificate (BL0333)

Bel Engineering introduces the new series of semiMicro HPBG balances with a resolution of 0.01 mg. Equipped with the new highly integrated electromagnetic cell, with automatic internal calibration on all models, they are characterized by a high level of precision and repeatability.

All models are equipped with a large graphic display for easy reading and user friendly operations with many functions.

HPBG balances have an extensive recipe database, GLP and many embedded advanced features that make them perfect for use in laboratory, research departments, compounds formulation and quality control applications.

As in the tradition of BEL products, new semiMicro HPBG balances deliver an excellent performance / price ratio, thanks to the continuous research and study of Bel Engineering in the high resolution and precision weighing field.

• Electromagnetic force restoration weighing system
• Highly integrated weighing cell
• Recipe database: 99 recipes can be stored, each with up to 20 ingredients
• Large Graphic display allows efficient and easy operations
• Multilanguage: EN-DE-FR-IT-ES-PT
• GLP/ISO record keeping of weight values with date, time and serial number
• Large glass draught shield with 3 sliding doors for easy access to the items being weighed
• Plastic protection cover for keypad

• Ioniser Ion-A15 (BL0371)
• Serial Printer TLP-50, with date/time (C054)
• Serial Printer DPP-250 (AC007)
• Density KIT for solids and liquids (AC002)
• Alphanumeric external keyboard (AC005)
• Serial to USB converter (E1002)
• Serial cable for serial output to printer or PC (E743)
• Factory Calibration certificate (BL0333)

M5 semi-micro balances are the top level, most innovative and advanced series made by BEL. Equipped with large 5’’ colour touch screen display, it gives a user-friendly access to all the balance’s advanced applications and internal databases.

The user has easy and intuitive access to all the functions thanks to the icon-driven menus. This means more efficiency, productivity and interactivity.

The many on-board functions already included, up to 6 operating languages, the large 5’’ inch display and the RS232 serial output close the circle of a complete product, reliable and truly convenient.

• Electromagnetic force restoration weighing system
• Highly integrated weighing cell
• Automatic internal calibration
• 5’’ Touch-screen Display 800×480
• RS232 serial interface
• Selectable Measuring units
• Internal Database
• GLP
• Multi Languages (EN-DE-FR-IT-SP-PT)
• Multi-user with password protection
• USB port for import/export database data
• Advanced piece counting function with Statistics report
• Textile function to measure fibres with Statistics report
• Advanced Density function, with density index (DI) calculation
• Formulation (Recipe)
• Checkweighing
• Percentual weighing
• Weights adding
• Animal weighing
• Max load determination (Peak hold)
• Large glass draught shield with 3 sliding doors for easy access to the items being weighed

• Portable ioniser Ion-A15 (BL0371)
• Serial Printer TLP-50, with date/time (C054)
• Serial Printer DPP-250 (AC007)
• Serial Printer STAT, with Statistics functions (AC022)
• Density KIT for solids and liquids (AC002)
• Serial to USB converter (E1002)
• Serial cable for serial output to printer or PC (E743)
• USB pen drive 8 Gigabyte
• Stylus pen for touchscreen
• Factory Calibration certificate (BL0333)